California State Polytechnic University's 1st Annual ESD Seminar Series 2003

California State Polytechnic University's 2nd Annual ESD Seminar Series 2004

China 2002

Penang 2002

Johor Bahru 2004

Johor Bahru 2004

Johor Bahru 2004

Mexico 2002

ESD SEMINAR COMMENTS FROM PENANG MALAYSIA IN JUNE 2004

7th¹, 9th & 10th Inherently Conductive Polymer Conference

¹Nobel Prize Winner in Attendance

ü     This ESD Tutorial helps understand the aspect of ESD which will help companies to save their ESD sensitive products from damage loss of income. I'm sincerely very thankful for the sponsor of this tutorial.

ü     I would like to thank the sponsors and the speaker for providing the training and sharing the knowledge. It is really a wonderful job done.

ü     I have learned a lot more about ESD from your seminar. For a start, we have decided to provide grounding to all our trolleys. Keep up the Good Work and feel free to make an appointment to visit us.

ü     I would like to take this opportunity to thank the Organizer ( Ire-Tex Corporation ) for taking the interest to educate the community.  I also wanted to say that Bob did a wonderful job on his talk that shows he did his home work very well.

ü     It  is  a  good  seminar,  well-organized  and  conducted. Should  hold  it  more  often  instead  of  4  years  once. Thanks for the invitations.

ü     Good basics for ESD basics and test.

ü     Has a very useful info toward my working or my nature of work.

ü     Great - do it more after.

ü     Excellent presentation. Bob is very knowledgeable on this topic.

ü     Helpful tips and knowledge to help in extreme ESD sensitive areas.

ü     Good forum to create better awareness.

ü     Particularly like the real life experiments.

ü     I would like to thank the sponsors and the speaker for providing the training and sharing the knowledge. It is really a wonderful job done.  

Subject:        RV: Regards from GDL CADELEC !

Date:              11/2/2004 6:16:20 PM Pacific Standard Time

To:    bob@esdrmv.com, ESDRENEE@aol.com                                                                                                                                                             

        Dear Bob and Renee,

really it was a great experience... 

Bob, your dedication and clear explanation on the ESD subject was appreciated by all of us... 

Best regards,

gracias.....buen dìa ! 

Ma. del Consuelo Borrego G.

CADELEC

Gerente del Programa Desarrollo Proveedores

 In a message dated 11/4/2004 12:20:06 PM Pacific Standard Time, ti.com writes:

 Bob,

 Thanks a lot for the information.

 It was very helpful and interesting seminar.

 Best regards,

Ezequiel

In a message dated 11/1/2004 2:19:30 PM Pacific Standard Time:

                  Renee & Bob, thanks again for coming last week here to GDL, your ESD fundamental presentations were grate!.    If any of you like to get into our web page, there is a link (in English) so you could know us more.

                  As a reminder we would like to receive a copy of the ISO 20.20 standard (Spanish version “if available it’s fine” as you mentioned), also ANSI/ESD S541-2003 requirements & reference resistance table and finally industry test table. (If you consider any additional ANSI/ESD information important for us to have it as a reference don’t hesitate to send that too please). 

                 Thanks Renee & Bob,  ……  again It was a pleasure had met both of you last Friday, Regards!. 

        C A D E L E C       

Ing.  Luis  E.   Milian Hdez.

Especialista     Manufactura

Desarrollo  de Proveedores

 Question: 4- Bob, before asking “ thanks for being here”…

 You mention that exist an ISO certification, we are looking for the ESD certification: So, could you explain me what is the protocol to be certified? NOTE: There is not many companies capable to certified under/for ANSI/ESD S20.20

 Thanks in advance!

 Marcia Cruz

BenchMark

Hello Bob and Jorge Aragon.

       Thanks a lot for setting up the ESD seminar, that unfortunately I was unable to attend due to business trip, but several peers from IBM have given already the details and they were complete satisfied for the seminar.
A Navarro
        Thanks again, and hope to see you in the near future.
IBM de MEXICO Manufactura y Tecnología STD Guadalajara

Subj: Re: ESD Seminar at San Jose State University

Date: 08/20/2001 2:47:17 AM Pacific Daylight Time

To: ESDRJV@aol.com

Dear Bob, Thank you very much for your information. I appreciate if you keep me

contacted regarding ESD topics. Thank you again, if I have hot news and

topics, I would like to inform you.

See you again!

Mamoru Ishimaru

IBM Japan Business Logistics Co., Ltd.

 Intel

In a message dated 10/17/2002 10:35:45 AM Pacific Daylight Time:

Subj: RE: ESD Seminar in Guadalajara 12 November 2002  Date: 10/17/2002 10:35:45 AM Pacific Daylight Time
To: anavarro@mx1.ibm.com, ESD@mx1.ibm.com, francisco_sanchez@hp.com

File: ESDInternationaldeMexicoSeminarInvitation.ZIP (89368 bytes) DL Time (115200 bps): <1 minute Sent from the Internet

Hola amigos!!
El Roberto es muy bueno in los materiales electrostaticos.
Hojale pueden ir
Adios, tu Amigo
Julian Antonio Montoya "Cabeza De Cebolla"  

Hewlett-Packard:

Bob, thank you for your great seminar. 

I really enjoy because the fact that we face some questions, And when I ask you regarding the so high power energy that the electrons release when hit the wafers "Bob it is not related with mass ?). Now, I just remind  Mr. Albert Einstein, when he mentioned the increasing in mass proportional to the velocity in the electrons, and the interchange between mass-energy, as essential principle of the physics.
                                      Have a good day.
><><><><><><><><><>.<><><><><><><><><><>
Francisco J. Sanchez S.
IPG Product Completion Marerials Engineer. 

ESD TRAINING AT GENERAL MOTORS

Date: 11/27/2001 12:50:06 PM Pacific Standard Time

To:     ESDRJV@AOL.COM

Bob, thanks again for a well done class. I have included with this email the list of names for the certificates .If there are any questions please feel  free to call me or e-mail me.

Regards,  Mark.

Date: 11/26/2001 1:29:48 PM Pacific Standard Time

To:   esdrenee@aol.com

Hi Renee,

…I wanted to say that Bob did a great job on his talk. I knew much of the material he talked about but Bob presented in a way that kept my interest.  It was obvious that Bob did a lot of work and it showed. Good Job!

Thanks!

Greg Christian

Subj: RE: Follow Up to ESD Seminar @ San Jose State University

Date: 08/20/2001 10:45:05 PM Pacific Daylight Time

To: ESDRJV@aol.com

Bob:I enjoyed your class very much last week. I definitely feel like I walked away with some very useful information. You also conveyed it in a way that made it both interesting and entertaining. Nice job! Your attached has some fantastic information, thank you. I have forwarded your information to my VP of Packaging, John Myers, he is very interested in talking with you. He will

contact you directly through voice or e-mail. Thanks again for a great class and the information you passed on. I implore you to look us up next time your in the Portland area. We would love to have you out to our facility.

Brian Raschio-account manager

Date: 01/23/2002 10:35:21 AM Pacific Standard Time
Dear Bob, I enjoyed your ESD class at SJSU.  I think it will become more and more useful as medical equipment become more and more advanced. Our guy that is involved with that is out of the office, but I e-mailed your info to him.
Thanks
Wes McDonald
Packaging Engineer
Stryker Endoscopy

SONY
Hello Renee !!!

Thank you for the info.

From SML side we also enjoyed the seminar and we found it very interesting due to now we have a clear point of view of what ESD is and what it can do if we don't work properly.

I'll appreciate it if you keep sending me this kind of information...

Regards and Thank you.

Ramón

From Texas Instruments:

Hi Bob,

I received today the CD and a copy of the Cal Poly ESD Seminar. Thank you so much. I learn a lot from your evaluations, seminar and papers that you have shared.   

Thanks again.

Sincerely,
Albert

Date:  7/25/2003 3:51:59 PM Pacific Standard Time

To:      bob@esdrmv.com

Sent from the Internet (Details)
Dear Bob,
I would like to thank you for the excellent ESD seminar that you just conducted. I received very good feedbacks from the attendees. If I have some projects that need third party ESD testing I will contact you.

Have a nice weekend.
Sincerely,
Albert

Subj:        Seminar Feedback 

Date:        8/8/2003 6:46:39 AM Pacific Standard Time

To:            bob@esdrmv.com

Sent from the Internet (Details)

Bob, I just spoke with Renee and gave her a lead to our plant in Rapid City . 

As a follow up to the seminar I wanted to tell you that I thoroughly enjoyed the seminar.  Your use of examples and demonstrations really help to drive the salient points home for the attendees.

The coins in the bag are really powerful, because most people would not believe that the metal coins could help to generate a charge.

I have a question that I thought of after the seminar.  If an ungrounded individual puts their hand into an ESD bag and then picks up a PCA with the outside surface of the bag making contact with the board, is the
board in danger? I suspect it is because the bag being still open does not become a Faraday Cage. 

It might work if the bag was large enough for the individual to get into, then seal the bag and then grab the board from inside the bag. That's a big bag.

I thought a good demo for this would be to put your hand into a bag and then grad your antenna to see/hear the results.

Let me know your thoughts on the matter.

Again, thanks for the seminar and I look forward to meeting you again sometime soon.

Regards,

Kirby P. Neck, Jr.
Technical Project Manager - Sanmina-SCI
Resident on HP Houston site

In a message dated 7/15/2004 5:44:39 PM Pacific Standard Time:

Dear Bob,

Thanks for explaining a lot regarding ESD to us during the training held in
Johor Bahru. While I had gone to some ESD training prior to this one
(organized by HP), I have to admit that I learnt much much more from what
you presented to us, and there are a lot of interesting points as well to
pick up and remember :)

By the way, just to make sure that I can refer to the material presented
from time to time to refresh my memory, is there any way you can email me a
soft copy of the slides? That would be really helpful to me.

Thanks :)

Zaihas
Procurement Engineer
Flextronics Malaysia

In a message dated 6/22/2004 6:33:11 PM Pacific Standard Time, Terence Ten writes:

Hello Bob, 

How are you doing ? I supposed your recent trip into West Malaysia , Penang and Johor was enriching one for both you and your wife, Renee.

It was my privilege to attend your ESD Tutorial in Johor last Friday. Your sharing of knowledge and experience had further enhanced my understanding.  

God bless your family, 

Terence Ten 

Maxtor Peripherals (S) Pte Ltd

In a message dated 7/6/2004 1:11:51 AM Pacific Standard Time:

Hi Bob,

Don't worry....... Now I know who to get hold if I have the ESD problem.

Your presentation was the Best so far, compare to others.

By chance if you happen to visit Penang or Malaysia , please don't forget to contact me.

Regards...Capt.(Rtd) Bonny CK Loo

In a message dated 7/11/2004 4:51:54 PM Pacific Standard Time:

Bob,

Thanks for your mail and I am pleased to have attended the seminar and ESD the knowledge gained during the seminar.

Rgds/

David Khor
VA Center Manager
Arrow GPS, Penang