top of page



For more information on these test methods, please contact RMV direct with your inquiry or a Request for Test and Evaluation - Standards are listed alphabetically and by year.  Not all Standards are listed in this inventory.  Please call or email if you do not see what you are looking for.  Several Standards are not listed that are rarely used or that have low repeatability for measurements.   

January 03, 2023

AATCC-134 (ESD Carpets) - Electrostatic Propensity of Carpets

Electrostatic propensity of carpets test methodology measures the floor's tendency to generate a charge.  This test is not recommended for Aerospace & Defense, Medical Device or Consumer Electronics where device sensitivity and harsh environments are the main factor. 

February 23, 2023

ANSI/ESD S541-2008 Packaging Materials for ESD Sensitive Items


This standard describes the packaging material properties needed to protect electrostatic discharge (ESD) sensitive electronic items and references the testing methods for evaluating packaging and packaging materials for those properties. Where possible, performance limits are provided. Guidance for selecting the types of packaging with protective properties appropriate for specific applications is provided. 

May 28, 2023

ANSI/ESD STM97.2-2006 Floor Materials and Footwear– Voltage Measurement in Combination with a Person


This standard test method provides for measuring the electrostatic voltage on a person in combination with floor materials and footwear, as a system.

January 01, 2020

ANSI/ESD S4.1-2006 Worksurface Resistance Measurements & Mil-PRF-87893B


Provides test methods for evaluating and selecting worksurface materials, testing of new worksurface installations & the testing of previously installed worksurfaces.

January 01, 2020

ANSI/ESD SP10.1-2007 Automated Handling Equipment (AHE)


This standard practice provides procedures for evaluating the electrostatic environment associated with automated handling equipment.

January 01, 2020

ANSI/ESD S8.1-2012 Symbols–ESD Awareness


Three types of ESD awareness symbols are established by this document. The first one is to be used on a device or assembly to indicate that it is susceptible to electrostatic charge.The second is to be used on items and materials intended to provide electrostatic protection. The third symbol indicates the common point ground.

January 01, 2020

ANSI/ESD S11.4-2012 ESDA Standard for Protection of ESD Susceptible Items-Static Control Bags ​


January 01, 2020

ANSI/ESD STM11.31-2012 (Shielding for Type I and III Bags) ANSI/ESD STM11.31-2012 Shielding for Type I & III Bags (Hyperlinked)

January 01, 2020

ANSI/ESD S1.1-2013 (Wrist Straps)


A successor to EOS/ESD S1.0, this document establishes test methods for evaluating the electrical and mechanical characteristics of wrist straps. It includes improved test methods and performance limits for evaluation, acceptance, and functional testing of wrist straps.

1 / 5

Please reload

bottom of page