top of page
Welcome to the
RMV ELECTROSTATICS MATERIALS TEST LABORATORY
NASA AMES RESEARCH CENTER
Testing for Pre-Compliance, First Article
& Product Development
Pre-Compliance Testing, Product Consulting, Root Cause Analysis & Specification Development. Test lab services are conducted by Subject Matter Experts and all are US citizens.
Our iNARTE Certified ESD Engineering & EMC Staff not only provide the required testing but can also pinpoint the threshold of failure for your product and the integrity of a material before introduction into a "harsh" or "retail" environment.
ESD Materials & Product Test Laboratory at NASA Ames
Your IP is secure in Our Facility
RMV utilizes advanced ESD event detection measurement techniques to rate a facility for compliance to ANSI/ESD S20.20-2014 procedures (ANSI/ESD STM7.1 or ASTM F150).
The RMV humidity controlled room is capable of testing 48” x 48” flooring samples per ANSI/ESD STM7.1; STM 97.1; STM97.2 and ASTM F150 at the required 12%RH & 50%RH conditions.
ESD Chair Testing per ANSI/ESD STM12.1 can be performed at both 12% & 50%RH.
ESD work surface testing per ANSI/ESD S4.1 at 12% & 50%RH is performed.
ESD glove testing per ANSI/ESD SP15.1 can be performed at 12%RH & 50%RH.
RMV has several humidity controlled environmental chambers that can be controlled to 12%RH+/-3%RH or if required at 5%RH.
For Aerospace & Defense customers, RMV believes in "Redundancy."
◄
1 / 3
►
Please reload
bottom of page